Bloom Yellow Bottles

Grower Handbook · Chapter 11

Keeping a Hydro System Clean: Pythium, temperature and a routine.

A recirculating system shares everything, water and trouble alike. Here is what extension and journal sources say about root disease in hydroponics, what slows it down, and a short clean-up routine.

US Edition · Free download · Sources kept
Dark soil with fine white roots, the Bloom Grower Handbook chapter on keeping a system cleanBloom Grower Handbook · Chapter 11

Key takeaways

  • Root disease spreads quickly through shared, recirculated water.
  • Well-aerated, cooler water and tidy surfaces and tools all help.
  • Cover bare soil, clean tools between plants, and keep records.

How trouble travels, and what slows it

In a recirculating system the nutrient solution can carry a root pathogen from one plant to all of them. Pythium is one of the most common and destructive root pathogens in recirculating hydroponics.1,2 Researchers have studied several ways to treat the solution before it goes round again, including heat and filtration.2

8 ppm
dissolved oxygen at saturation, which can reduce Pythium zoospore survival.
Kentucky greenhouse extension. Lettuce and spinach system, not cannabis.1
Different crops and stagesTemperature
Nutrient solution, lettuce and spinach (Kentucky)20–22°C (68–72°F)1
Root zone, cuttings (Michigan State)22–24°C (72–75°F)3

Cooler water is optimal for spinach and lettuce and can slow Pythium survival and infection.1 Cuttings want a warmer root zone.3 These are different jobs: do not apply one crop’s number to another. Fahrenheit shown is arithmetic.

Surfaces and tools

Good sanitation reduces Pythium survival and introduction. Tools, gloves and net cups moved between plants and systems are common ways to carry it.1

Cover the bare bits

Cover bare soil to prevent algae build-up, and handle cuttings cleanly to avoid spreading viruses and pathogens.3

A short routine, between runs

  1. Drain and look. Empty the tank. Check roots and the inside of lines for slime or discoloration. Darkly discolored, soft roots are a warning sign.1
  2. Clean the surfaces. Use a surface cleaner suited to the surface; extension notes not all surfaces are treated alike.1
  3. Clean the tools. Scissors, knives, net cups and gloves between systems or plants.1
  4. Aerate and keep cool. Aim for well-aerated solution, and keep water on the cooler side for the crop.1

Keep a note each time: date, tank cleaned and rinsed, EC, pH and what you saw. Change one thing at a time, then wait.

Treating the solution

Research covers heat, filtration and other treatments for recirculating solutions, each with trade-offs in cost and effect on the solution.2 That is a system design choice, so read the source before you buy gear.

Bloom and a clean system

Bloom bottles go into your feed water. They are not a disinfectant, and we do not claim they prevent or treat root disease. Mix fresh, use clean containers, and follow your chart.

“I have noticed tighter node spacing and a very rich green to the vegetation. Overall, I am impressed.”

@devharmon Products named: Euro A/B, Roots. In the grower’s own words, from a DM. A soil-mix grower, so this is not a hydro result. One grower’s view, not a measured result.

Other crops: growing fruit, veg, peppers or ornamentals? Rates and the feed schedule are on the fruit and veg feed schedule page. This handbook prints no crop rates.

Honest check

  • Root-disease research here is on lettuce, spinach, tomato and cucumber systems, not cannabis. Treat it as method.
  • No Bloom product is claimed to prevent or treat disease.

Sources

  1. University of Kentucky greenhouse extension (e-GRO alert E706). Pythium and root disease in hydroponic systems. greenhousehort.ca.uky.edu
  2. Ehret DL, Alsanius B, Wohanka W, Menzies JG, Utkhede R (2001). Disinfestation of recirculating nutrient solutions in greenhouse horticulture. Agronomie 21. hal.archives-ouvertes.fr
  3. Runkle E. Propagation pointers; Improve rooting of cuttings; Indoor propagation. Michigan State University Extension. canr.msu.edu
  4. °F figures are arithmetic from the °C values in the sources.

Go deeper

Questions growers ask

How does Pythium spread in hydroponics?
In a recirculating system the nutrient solution can carry a root pathogen from one plant to all of them. Tools, gloves and net cups moved between plants and systems are common ways to carry it.
What slows Pythium down?
Extension points to good sanitation, well-aerated solution (dissolved oxygen at saturation, about 8 ppm, can reduce zoospore survival) and cooler water. That work is on lettuce and spinach, not cannabis.
What water temperature is best?
For lettuce and spinach, Kentucky extension says 20 to 22°C (68 to 72°F). Cuttings want a warmer root zone, 22 to 24°C (72 to 75°F). Do not apply one crop’s number to another.
What should I do between runs?
Drain and look, clean the surfaces, clean the tools, aerate and keep the water cool, and note the date, EC, pH and what you saw.
Do Bloom bottles prevent root disease?
No claim is made that they do. Bloom bottles go into your feed water and are not a disinfectant. Mix fresh, use clean containers and follow your chart.
How do I treat recirculated solution?
Research covers heat, filtration and other treatments, each with trade-offs in cost and effect on the solution. It is a system design choice, so read the source before you buy gear.

Download the full Grower Handbook (PDF, US Letter)

Questions on your grow? Talk to Nate.

Product images are renders. Stage and cover images are a mix of AI-generated illustrations and photos, used to show how things work, not results. This is general growing information for legal crops. Follow your local laws and the product label. Bloom products are plant nutrient additives. They are not pesticides and are not certified organic.

New to Bloom? Your one-time 30% thank-you is waiting.One-time 30% for first-timersClaim my 30%